How to update the AutoStore Client for Kodak Scan Station 500

Use this procedure to update software from the Kodak Scan Station console.
Note: Installation of the update may also be done from the AutoStore Process Designer through the Software Update feature found in the Group option on the Menu tab.
Note: You will need a USB 2.0 flash drive to move files to the Kodak Scan Station.
  1. Select C:\install directory\Distributables\Kodak Scan Station 500.
  2. For Kodak Scan Station 500, copy the following file onto the root directory of the USB 2.0 flash drive: NSiKSS500Update.exe.
  3. Shut down and restart the Kodak Scan Station.
  4. Select AutoStore Client on the Kodak Scan Station Interface.
  5. Insert the USB 2.0 flash drive into Kodak Scan Station.
    The following prompt to update appears: "Update from version 0.00 to version 1.08 OK to update now, cancel to perform later. Updating in xx seconds."
  6. Click OK.
    The Kodak Scan Station restarts.
  7. Remove the USB 2.0 flash drive from the Kodak Scan Station.