Prerequisites for installation

There are minimum firmware requirements for HP devices.

Visit the HP website for more information and for firmware downloads.

Group 10

  • CLJ 9500mfp 08.170.9
  • CLJ 4730mfp 46.260.9
  • LJ 9040mfp 08.170.9
  • LJ 9050mfp 08.170.9
  • LJ 4345mfp 09.180.9
  • DS 9200C 09.180.8

Group 20

  • LJ M3035 MFP 48.131.3
  • LJ M4345 MFP 48.131.3
  • LJ M4349 MFP 48.131.3
  • LJ M5035 MFP 48.131.3
  • LJ M5039 MFP 48.131.3
  • LJ M9040 MFP 51.081.2
  • LJ M9050 MFP 51.081.2
  • LJ M9059 MFP 51.081.2
  • CLJ CM4730 MFP 50.111.3
  • DS 9250C 48.121.0

Group 40

  • CLJ CM6030mfp series    52.081.2
  • CLJ CM6040mfp series    52.081.2
  • CLJ CM6049mfp series    52.081.2

Group 50

  • CLJ CM3530 MFP 53.061.3
  • Jedi
    Note: OXPd 1.4 is preinstalled for Jedi devices with firmware 11.1.
  • CLJCM4540MFP 2110179_149073
  • SJ7000n 2110180_149077

To install firmware for the Jedi group, follow directions that provided with your firmware download from the HP website.

HP OXPd can be installed using the HP Web Jetadmin or Solution Installer. HP Web Jetadmin is recommended when upgrading a large number of devices.  Several devices can be added to a specific group which can be created with HP Web Jetadmin.  Solution Installer is recommended for simple configurations such as the upgrading of one device at a time.  The solution management capabilities of HP Web Jetadmin 10.2.X support integration with OXPd’s Solution Installer.  HP Web Jetadmin can be downloaded from HP’s website.  Prior to installing OXPd jar files, prior installations of other jar files should be removed to ensure there are no conflicts.

Important: During the Chai DSE and OXPd jar file installation process (using either Solution Installer or HP Web Jetadmin), AutoStore server must be running with a configuration that uses the HP OXPd Capture component along with any Route component.  The HP OXPd Capture component publishes the Chai DSE and OXPd jar file through the HTTP protocol, which is only possible while running a valid AutoStore configuration.