How to import Solution Installer and Chai DSE & OXPd:Workflow components

The Solution Installer, Chai DSE and OXPd:Workflow components must be imported into the Repository.

Import Solution Installer

  1. In the left panel, under Solutions, click Repository.
    This opens the “Repository” on the right where Solution Installer, Chai DSE and OXPd:Workflow components can be imported, edited, deleted and installed.
  2. Click Import.
    This opens the Import Solutions window.
  3. Click Browse and select hp_oxpdsolutioninstaller-ex-1.0.1.0.jar located inside ..\Distributables\HP MFP-Digital Sender (OXPd)\jars\.
  4. Click “Open” and then click Import on the Import Solutions window.
    This configures the pointer to point to the solutions repository.
Solution Installer will be displayed as ILCStealthUpdater within the repository.

Import Chai DSE

  1. In the left panel, under Solutions, click Repository.
    This opens the Repository on the right where Solution Installer, Chai DSE and OXPd:Workflow components can be imported, edited, deleted and installed.
  2. Click Import.
    This opens the Import Solutions window.
  3. Click Browse and select the chai.xml file for the Chai DSE jar solution to be installed.
    The Chai DSE file for OXPd:SolutionInstaller is located within ..\Distributables\HP MFP-Digital Sender (OXPd)\jars\.
  4. Click Import.
    This configures the pointer to point to the solutions repository.  Chai DSE will be displayed as Chai Digital Send Enablers-V.4.3.0 within the repository.
  5. Select Chai Digital Send Enablers-V.4.3.0, and click Edit.
  6. Enter the web address of the JAR file (solution) to install. This tells the pointer where to get the solution when it is installed from the repository.
    Use the following http://host_name:3233/HPDS2/GetFile/chai. where host_name is the IP address or DNS name of the AutoStore Server running a configuration that uses the HP OXPd component.

    If the actual machine name is used, note that the machine name or complete DNS path name will need to be used depending on the network configuration.  Check with the system administrator.

  7. Leave the user name and password blank, and click OK.
Chai Digital Send Enablers – V.4.3.0 should be displayed in the Repository.

Import OXPD:Workflow

  1. In the left panel, under Solution, click Repository.
    This opens the Repository on the right where Solution Installer, Chai DSE and OXPd:Workflow components can be imported, edited, deleted and installed.
  2. Click Import.
    This opens the Import Solutions window.
  3. Click Browse and locate the oxpd.xml file for the OXPd:Workflow jar solution to be installed.
    The OXPd:Workflow jar files are located inside ..\Distributables\HP MFP-Digital Sender (OXPd)\jars\.
  4. Click Import.
    This imports the pointer into the Solutions Repository, where it will be displayed as OXPd: Workflow 1.4.9.0 in the repository.
    Note: If this is not displayed then delete Chai Digital Send Enablers-V.4.3.0 from the Repository and start over.
  5. Select OXPd:Workflow 1.4.9.0, and click Edit.
  6. Enter the web address of the OXPd:Workflow jar file solution to install. This tells the pointer where to get the solution when it is installed from the repository.
    Use the URL http://host_name:3233/HPDS2/GetFile/oxpd, where host_name is the IP address or DNS name of the AutoStore Server running a configuration that uses the HP OXPd component..  If the actual machine name is used, note that the machine name or complete DNS path name will need to be used depending on the network configuration.  Check with the system administrator.
  7. If credentials are necessary to reach the server, enter the user name and password.
  8. Click OK.
OXPd: Workflow 1.4.9.0 should be displayed in the Repository.