Use this dialog to specify the settings for printing watermarks on the pages of the generated document.
|Print watermarks||Select this check box to enable watermarks printout. If this check box is not selected, all the other settings in this dialog are disabled.|
|Watermark text||Enter the text which will be printed on the pages of the generated document as a watermark.
You can use one or several
available RRTs in this field.
Note: When you use characters that are not in the Western-European and US character sets, for example, Eastern-European and Far-Eastern characters, in the Watermark text field, you have to select the Multi-language support option in the Structure tab for correct text representation.
|Watermark color||Enter watermark text color in the "red, green, blue" form. Each component of this
form is an integer value 0-255. For
example, 255,255,255 for White, 255,0,255 for Magenta.
Alternatively, color can be specified as single decimal or hexadecimal number. For example, 16777215 or 0xffffff for White, 16711935 or 0xff00ff for Magenta. You can use the button next to this field to select the color from the color selection dialog box.
|Text font||Enter the name of the font for the watermark. You can use one or several available RRTs in this field. By default, the Arial font is used for watermarks.|
|Font size||Enter the size of the font for the watermark. The size value can be entered with 0.1 precision. You can use one or several available RRTs in this field.|
|Horizontal||Enter the horizontal coordinate of the watermark on the page, in inches. This field can contain RRT or a number with 0.01 precision. The minimal value is 0.0 inches.|
|Vertical||Enter the horizontal coordinate of the watermark on the page, in inches. This field can contain RRT or a number with 0.01 precision. The minimal value is 0.0 inches.|
|Orientation||Enter the angle of rotation of the watermark. Zero (0) means no rotation, that is, horizontal text. This field can contain RRT or a number with 0.1 degree precision. The minimum value is 0.0 degrees.|
|Print on||Specify the pages on which the watermark will be printed:
|Pages list||This field becomes enabled, if you select "Pages from following list" in the Print on field. Enter
comma-separated list of page numbers or ranges, for example, 1, 2, 10-15.
If you want to set particular pages for watermarks printout, type here the numbers of particular pages separated by a comma. For example, 2, 6, 8.
If you want to set a page range for watermarks printout, type the number of a first page in the range, then insert "-" or "..", and close the range with the number of the last page in the range. For example, 31-49 or 31..49.
You can set several page ranges for watermarks printout using the above syntax. In this case, each page range should be separated from others by comma. For example, 31-49, 50-64, 67..70.
Separate pages and page ranges can be combined in one string the same way, with comma as a separator. For example, 1,2,5-7,10,20..25.
You can set an open range in order to print watermarks on pages from a particular page and till the end of the file. To do so, set the opening page number followed by ".." or "-". For example, 7- or 7.. .
You can also set an open range in order to print watermarks starting from the first page of the job and till the particular page. To do so, set ".." or "-" followed by the particular page number. For example,-7 or ..7.
|Print watermarks over the page contents||If you select this check box, the watermarks will be printed over page contents. By default this check box is not selected and watermarks are printed at the page background, behind the page contents.|